Air Lines and Connectors

Flexible nylon air lines, 3.2 mm (1/8 inch) in diameter, are used to transfer the pressurized air from the electronic level control air compressor to the shocks or inflator fill valve. The system contains two air line "jumpers", which go to and from the inflator solenoid, and a crossover air line, which goes to the air shocks. "Snap on" connectors are used to attach the air lines to system components and must be used for proper seal. While the air lines are flexible for easy handling and routing, care should be taken not to kink them and to keep them from coming into contact with the exhaust system.