Troubleshooting Hints - Brake Transaxle Shift Interlock

1. Check the IGN Fuse for all open. If the fuse is blown check CKT 39 for a short to ground.
2. Make sure G113 is clean and tight.
3. Always check terminal contact before replacing any component.
^ Check for a broken (or partially broken) wire inside of the insulation which could cause system malfunction but prove "GOOD" in a continuity/voltage check with a system disconnected. These circuits may be intermittent or resistive when loaded, and if possible should be checked by monitoring for a voltage drop with the system operational (under load).
^ Check for proper installation of aftermarket electronic equipment which may affect the integrity of other systems. Refer to General Troubleshooting Procedures. Diagnostic Aids
^ Refer to System Diagnosis.