Fastener Tightening Specifications - Unit Repair

2-1 Manual Servo Cover Bolt 20-27 Nm (14.7-20 lb ft)
Ball Check Assembly, Cooler 46-58 Nm (34-43 lb ft)
Case Extension Bolt 30-41 Nm (22-30 ft.lbs.)
Case Side Cover Nut (Flanged Hex) 5-11 Nm (45-97.4 lb in)
Case To Drive Sprocket
Support Screw 20-27 Nm (14.7-20 lb ft)
Channel Plate To Case Bolt 20-27 Nm (14.7-20 lb ft)
Connector - Cooler
Inverted Flared Tube 32-44 Nm (23.5-32.5 lb ft)
FWD Servo Cover Bolt 7-13 Nm (62-115 lb in)
Hex Flange Bolt
Accumulator Cover & Housing 8-14 Nm (71-124 lb in)
Manual Shaft To Detent Lever Nut 27-36 Nm (20-26.5 lb ft)
Manual Detent Sprig To Channel
Plate Bolt Special 8-14 Nm (71-124 lb in)
Metric Hex Bolt
Structural Side Cover 20-27 Nm (14.7-20 lb ft)
Modulator Bolt 20-27 Nm (14.7-20 lb ft)
Oil Pan Bolt 9-13 Nm (80-115 lb in)
Pipe Plug - (Line Pressure) 7-14 Nm (62-124 lb in)
Pump Body To Case Bolt 20-27 Nm (14.7-20 lb ft)
Pump Cover To Channel Plate Bolt 8-14 Nm (71-124 lb in)
Pump Cover To Pump Body Bolt 20-27 Nm (14.7-20 lb ft)
Pump Cover To Valve Body Bolt 8-14 Nm (71-124 lb in)
Screw And Conical Washer Assembly 9-13 Nm (80-115 lb in)
Speed Sensor Bolt 8-14 Nm (71-124 lb in)
Structural Side Cover To Case Stud 20-27 Nm (14.7-20 lb ft)
Temperature Sensor 6.5-7.5 Nm (57.5-66.5 lb in)
Torch Head Bolt
Structural Side Cover 20-27 Nm (14.7-20 lb ft)
Valve Body To Case Bolt 20-27 Nm (14.7-20 lb ft)
Valve Body To Channel Plate Bolt 8-14 Nm (71-124 lb in)
Valve Body To Channel
Plate Bolt (Torx) 8-16 Nm (6-12 lb ft)