Front

Wiring Diagram:

Description:

^ Make the following checks before beginning System Diagnosis.
1. Check the wiper fuse. If open, check for short to ground through CKT 243 and replace fuse.
2. Check that all system electrical connectors are mated firmly.
3. If washer does not operate, check that:
- Washer reservoir is filled.
- Hoses are correctly attached.
- Hoses are not cut, kinked, or pinched.
- Nozzles are not clogged.
- Connector seal at washer pump is not damaged or missing.
4. Check for binding or broken wiper arm linkage.
^ Refer to System Diagnosis.