Adding Customer's Code

1. Hold in the pushbuttons 1 and 4 for about 6 seconds until the display changes to a series of dashes.

IMPORTANT: The theft deterrent feature is already activated if SEC is displayed. This means the old code must be removed before entering a new code.

2. Press the HR button.
3. Set the first 2 digits (0-19) of the code with the HR button.
4. Set the next 2 digits (0-99) of the code with the MIN button.
5. Press AM-FM button in order to enter the code.
6. Repeat the steps 3 through 5 when REP, then 000 are displayed.

This confirms the customer's code, activates the theft deterrent feature, and after Step 5, displays the SEC, showing that the theft deterrent features has been activated.

The THEFTLOCKTM light will flash once every 2 seconds anytime the ignition is removed and the THEFTLOCKTM is activated. The display will show LOC and will need to be unlocked by either the customer's code or the factory backup code anytime the battery power is cycled and the ignition is applied.