Arming

To arm the content theft deterrent system:
1. Turn the ignition switch to the LOCK position.
2. Remove key from the ignition lock cylinder.
3. Open the driver's door.
4. While the driver's door is open, perform one of the following:
^ Press lock on either power door lock switch.
^ Press lock on the keyless entry transmitter.
^ Use the LF, RF or liftgate door key cylinder to lock door.

The security indicator lamp flashes while the driver door is open. Then, the lamp turns on steadily while the driver's door is closed when the content theft deterrent system enters the arming mode. Finally, the lamp flashes continuously at a slow rate when the content theft deterrent system is armed.

Refer to Theft Deterrent Arm/Disarm Modes for procedures on enabling or disabling the lock switch arming feature. Theft Deterrent Arm/Disarm Modes