Stand-By Mode

Lamp Status: Off.

The content theft deterrent system enters the stand-by mode when all of these conditions are met:
^ Pressing unlock on the keyless entry transmitter; also by unlocking the LF, RF or liftgate door using door key cylinder when the arm/disarm is in mode 1 or 3.
^ The ignition switch is in the LOCK or OFF position, with the key fully inserted in the ignition key lock cylinder.
^ All vehicle doors are closed.

The content theft deterrent system exits the stand-by mode and goes into ignition on mode when turning the ignition switch to the ACC or RUN position.