Automatic Door Lock Operation Modes

Automatic Door Lock Operation Modes:

- Shift out of PARK lock enabled (modes 2, 3 and 4): Locks all doors when shifting the transaxle out of PARK with the driver's door closed.
- Ignition OFF unlock enabled (mode 3): Unlocks all doors when turning the ignition switch from the RUN to the UNLOCK position.
- Shift into PARK unlock enabled (mode 4): Unlocks all doors when shifting the transaxle into PARK.

Changing the Automatic Door Lock Operation Mode
Perform the following procedure to change the automatic door lock operation mode:
1. Turn off the I/P dimmer switch.
2. Turn the ignition switch to the LOCK position.
3. Remove the BCM PRGRM fuse.
4. Turn the ignition switch to the ACC position.
- The BCM sounds the chime a number of times equivalent to the BCM type installed on the vehicle (1,2,3, or 4 chimes).
- Now the BCM has entered the feature customization mode.
5. To change the automatic door lock operation mode, press and release the LOCK on either door lock switch.
- The BCM sounds the chime a number of times equivalent to the automatic door lock operation mode. A transition past mode 4 repeats the sequence starting with mode 1.

To exit and save the current customization mode:
1. Turn the ignition switch to the LOCK position.
2. Reinstall the BCM PRGRM fuse.

If unable to change locking modes, refer to Table 14 for diagnosis and repair. Table 14: Cannot Change Feature Customization Modes