Mode Valve

Removal Procedure

1. Remove the instrument panel assembly.
2. Remove the mode valve vacuum actuator from the mode valve.





3. Remove the air distribution case cover retaining screws.
4. Remove the air distribution case cover.
5. Remove and discard the air distribution case seal.
6. Remove the mode valve.

Installation Procedure





1. Install the mode valve.
2. Install a new air distribution case seal
3. Install the air distribution case cover.
4. Install the air distribution case cover retaining screws.

Tighten
Tighten the screws to 1.6 N.m (14 lb in).

5. Install the mode valve vacuum actuator to the mode valve.
6. Install the instrument panel assembly.