Fog Lamp Replacement - Front

REMOVAL PROCEDURE




1. Disconnect the electrical connector from the back of the fog lamp.
2. Remove the nuts (2) that retain the fog lamp (1) to the front bumper fascia.
3. Remove the fog lamp (1) from the front bumper fascia.

INSTALLATION PROCEDURE




1. Install the fog lamp (1) to the front bumper fascia.

NOTICE: Refer to Fastener Notice in Cautions and Notices.

2. Install the nuts (2) that retain the fog lamp (1) to the front bumper fascia.

Tighten
Tighten the bolts/screws to 2 N.m (18 lb in).