Radiator Hose Replacement - Inlet

REMOVAL PROCEDURE

^ TOOLS REQUIRED
- J 38185





1. Partially drain the coolant.
2. Disconnect the inlet hose from the thermostat housing using the J 38185.
3. Disconnect the inlet hose from the radiator using the J 38185.
4. Remove the inlet hose.

INSTALLATION PROCEDURE





1. Install the inlet hose in position and align the marks on the hose.
2. Connect the inlet hose to the radiator using the J38185.
3. Connect the inlet hose to the thermostat housing using the J 38185.

IMPORTANT: To properly fill the system you must use of the air bleed vents.

4. Refill the coolant.