Wheel Speed Sensor Jumper Harness Replacement (Right Front)

REMOVAL PROCEDURE
1. Raise and support the vehicle on a suitable hoist.
2. Remove the connector from the right front wheel sensor.





3. Remove the harness (7) from the control arm retaining clips (8).
4. Remove the harness (7) from the splash shield retaining clips (6).
5. Remove the right front wheel speed sensor jumper harness to ABS harness connector (3).
6. Remove the right front wheel speed sensor jumper harness (7).

INSTALLATION PROCEDURE
1. Install the right front wheel speed sensor jumper harness to ABS harness connector (3).





2. Install the harness (7) to splash shield retaining clips (6).
3. Install the harness (7) to control arm retaining clips (8).
4. Install the connector to wheel speed sensor.
5. Lower the vehicle.