Control Arm

Front Lower Control Arm Ball Stud To:
Steering Knuckle Nut* 55 Nm (40 ft. lbs.)
Front Lower Control Arm Bolts 68 Nm (50 ft. lbs.)
Front Lower Control Arm Mounting Nuts 113 Nm (83 ft. lbs.)
Rear Control Arm Nut 220 Nm (162 ft. lbs.)


* Tighten the nut in order to align the cotter pin hole with the front lower control arm ball stud. Do NOT loosen the nut in order to align the cotter pin hole.