Excessive Friction Check

Perform the following procedure for checking excessive friction in the rear suspension:
^ With the aid of a helper, lift up on the rear bumper and raise the vehicle as high as possible. Slowly release the bumper and allow the vehicle to assume normal trim height.
^ Measure the distance from the floor to the center of the bumper.
^ Push down on the bumper, release slowly and allow the vehicle to assume normal trim height.
^ Measure the distance from the floor to the center of the bumper.

The difference between the two measurements should be less than 12.7 mm (0.5 inch). If the difference between the two measurements exceeds this limit, inspect the control arms for damage or wear.