Engine Controls - Revised DTC P0101
File In Section: 06 - Engine/Propulsion SystemBulletin No.: 02-06-04-040
Date: July, 2002
SERVICE MANUAL UPDATE
Subject:
Revised DTC P0101
Models:
1996-98 Buick Skylark
1996-99 Buick Century, Regal
1996 Chevrolet Beretta, Corsica
1996-99 Chevrolet Lumina, Monte Carlo, Venture
1997-99 Chevrolet Malibu
1996 Oldsmobile Cutlass Ciera
1996-97 Oldsmobile Cutlass Supreme
1996-98 Oldsmobile Achieva
1996-99 Oldsmobile Silhouette
1997-98 Oldsmobile Cutlass
1999 Oldsmobile Alero
199~99 Pontiac Grand Am, Grand Prix, Trans Sport
1999 Pontiac Montana
with 3.1L or 3.4L Engine (VINs J, M, X, E - RPOs LG8, L82, LQ1, LA1)
This bulletin is being issued to revise DTC P0101 in the Engine Controls sub-section of the Service Manual. Please replace the current information in the Service Manual with the following information.
The following information has been updated within SI2000. If you are using a paper version of this Service Manual, please make a reference to this bulletin on the affected page.
The text in Steps 7 or 9 (depending on the model) in DTC P0101 has been revised to read "Does the scan tool parameter go from 0 to 100%?".
DISCLAIMER