Antenna: Service and Repair
FIXED ANTENNA REPLACEMENTREMOVAL PROCEDURE
NOTE: Use tape on the tool surface so that you do not damage the paint on the antenna mast.
1. Unscrew the antenna mast.
2. Remove the mast from the antenna base.
3. Unscrew the locking nut from the base in order to release the base from the fender.
4. Remove the base from the fender.
5. Disconnect the antenna lead.
INSTALLATION PROCEDURE
1. Connect the antenna lead to the antenna base.
2. Run the antenna lead through the fender hole
3. Align the lead with the antenna base.
NOTE: Refer to Fastener Notice in Service Precautions.
4. Tighten the locking nut and fasten the antenna base to the fender.
Tighten
Tighten the nut to 5 N.m (44 lb in).