Exterior Moulding / Trim: Service and Repair

Weld Stud Replacement

If a weld stud is damaged during a repair procedure, perform the following steps in order to replace the weld stud:

Caution: Refer to Safety Glasses Caution in Cautions and Notices.
1. Drill a hole into the same location as the damaged weld stud.
2. Drive a screw into the drilled hole.
3. Use a screw to retain the following components:

* The clips
* The moldings
* Other components

4. If the surface is damaged, repair and paint the surface as needed in order to provide a smooth surface. Refer to Anti-Corrosion Treatment and Repair () in Paint/Coatings.