Dome Lamp Replacement (With RPO Code U2)

DOME LAMP REPLACEMENT (WITH U2)

REMOVAL PROCEDURE




1. Remove the dome lamp lens cover.
2. Remove the screws from the dome lamp.
3. Disconnect the electrical connector from the dome lamp.
4. Remove the dome lamp.

INSTALLATION PROCEDURE




1. Connect the electrical connector to the dome lamp.
2. Align the dome lamp to the headliner.
3. Install the screws to the dome lamp.

Tighten the screws to 2 N.m (18 lb in).

NOTE: Refer to Fastener Notice in Service Precautions.

4. Install the dome lamp lens cover.