Mirror Replacement

MIRROR REPLACEMENT

REMOVAL PROCEDURE
1. Remove the front door upper trim panel extension.




2. Disconnect the mirror electrical connector, if equipped.
3. Remove the mirror to door nuts.
4. Remove the mirror from the door.

INSTALLATION PROCEDURE




1. Position the mirror to the door.
2. Install the outside rearview mirror nuts.

NOTE: Refer to Fastener Notice Fastener Notice in Service Precautions.

Tighten the nuts to 10 N.m (89 lb in).
3. Connect the electrical connector to the mirror, if equipped.
4. Inspect the operation of the mirror.
5. Install the front door upper trim panel extension.