Seat Back Recliner Handle Replacement - Front

SEAT BACK RECLINER HANDLE REPLACEMENT - FRONT

REMOVAL PROCEDURE




1. Remove the seat from the vehicle.
2. Pull on the recliner trim handle. Remove the recliner trim handle.




3. Remove the seat riser trim handle by pulling on the handle.




4. Remove the screw from the outer trim panel.
5. Remove the outer trim panel from the seat cushion.




6. Remove the recliner handle bolt and spring. Remove the recliner handle.

INSTALLATION PROCEDURE




1. Position the recliner handle to the adjuster with the fastener and the spring. Secure the handle in place with the recliner handle bolt.

NOTE: Refer to Fastener Notice in Service Precautions.

Tighten the bolt to 10 N.m (89 lb in).




2. Position the outer trim panel to the seat cushion. Secure the trim panel with the screws.

Tighten the screws to 2.5 N.m (22 lb in).




3. Install the recliner handle trim.




4. Install the seat riser handle trim.
5. Install the front seat.