Seat Adjuster Replacement - Rear

SEAT ADJUSTER REPLACEMENT - REAR

REMOVAL PROCEDURE
1. Remove the rear seat from the vehicle.
2. Turn over the rear seat.




3. Remove the seat adjuster bolts from the seat frame.




4. Remove the locking washer from the towel bar.




5. Remove the seat adjuster from the rear seat.

INSTALLATION PROCEDURE




1. Install the seat adjusters to the seat frame.




2. Install the seat adjuster bolts to the seat frame.

NOTE: Refer to Fastener Notice in Service Precautions.

Tighten the adjuster bolts to 50 N.m (37 lb ft).
3. Align the towel bar with the seat adjusters. Fasten the towel bar in place.
4. Turn the seat over.
5. Install the rear seat to the vehicle.