Window Weatherstrip Run Channel Assembly Replacement - Front

Window Weatherstrip Run Channel Assembly Replacement - Front

Removal Procedure





1. Lower the front door window.
2. Remove the front door trim panel. Refer to Trim Panel Replacement - Side Front Door (Service and Repair) .
3. Remove the inner belt seal. Refer to Sealing Strip Replacement - Front Door Window Belt Inner (Sealing Strip Replacement - Front Door Window Belt Inner) .
4. Starting at one end, carefully pull the window weatherstrip run channel assembly from the door frame.



Installation Procedure





1. Install the window weatherstrip run channel assembly.

1. Starting at the lower rear corner of the window opening, press the weatherstrip run channel onto the door flange.
2. Ensure the channel is fully secured into the upper corners of the door frame.

2. Install the inner belt seal. Refer to Sealing Strip Replacement - Front Door Window Belt Inner (Sealing Strip Replacement - Front Door Window Belt Inner) .
3. Install the front door trim panel. Refer to Trim Panel Replacement - Side Front Door (Service and Repair) .