Handle Replacement - Instrument Panel (I/P) Compartment

HANDLE REPLACEMENT - INSTRUMENT PANEL (I/P) COMPARTMENT

REMOVAL PROCEDURE




1. Remove the I/P compartment door.
2. Remove the compartment latch screws.
3. Remove the latch and rod assembly from the compartment door handle assembly.
4. Remove the U-clip from the handle assembly.
5. Remove the handle assembly from the compartment.

INSTALLATION PROCEDURE




1. Position the handle assembly to the I/P compartment door.
2. Install the U-clip.
3. Position the latch and rod assembly to the compartment door.
4. Install the latch screws.

NOTE: Refer to Fastener Notice in Service Precautions.

Tighten the screws 2 N.m (18 lb in).
5. Install the I/P compartment door.