Trim Panel Replacement - Rear Quarter Lower

Trim Panel Replacement - Rear Quarter Lower

Removal Procedure





1. Remove the rear sill plate. Refer to Door Sill Plate Replacement - Liftgate (Service and Repair) .
2. Move the rear seat forward.




3. Remove the load floor.




4. Disconnect the cargo hooks in the rear side trim panel.




5. Remove the push pins from the side trim.




6. If necessary, remove the jack to access the driver side rear side trim panel.
7. Remove the rear side trim panel.



Installation Procedure

1. Align the rear side trim panel. Snap the panel into place.




2. Install the push pins to the side trim.





Notice: Refer to Fastener Notice in Cautions and Notices.

3. Install the cargo hooks.

Tighten the cargo hooks to 25 N.m (18 lb ft).





4. Install the load floor.
5. Install the rear sill plate. Refer to Door Sill Plate Replacement - Liftgate (Service and Repair) .