Rear Toe Adjustment

Rear Toe Adjustment





1. Loosen the toe link-to-frame fastener enough to allow for movement.

2. Important: The frame of the vehicle is slotted, a cam nut is available for service if required.

Rotate the toe link cam nut in the direction necessary to correct the toe angle.
3. Snug the toe link-to-frame fastener, do not tighten at this time.
4. Reinspect the rear toe specifications and adjust as necessary.

5. Notice: Refer to Fastener Notice in Service Precautions.

Hold the nut and tighten the link-to-frame fastener bolt.
^ Tighten the bolt to 110 Nm (81 ft. lbs.).
6. Repeat the procedure for the other rear wheel.