Wiring Harness Removal

Wiring Harness Removal




1. Using a small screwdriver, pry the wiring harness (224/225) electrical connectors off of the following components:

* Automatic transaxle fluid pressure manual valve position switch assembly (395)
* 1-2, 3-4 Shift solenoid valve assembly (315A)
* 2-3 Shift solenoid valve assembly (315B)
* TCC PWM solenoid valve assembly (334)
* Pressure control solenoid valve assembly (322)
* Automatic transaxle input speed sensor assembly (440)
* IMS (811)

2. Gently pull the automatic transaxle fluid temperature sensor (391) from it's clip.




3. Lift the wiring harness assembly (225) off of the transaxle.