Body Side Window Actuator Replacement

Body Side Window Actuator Replacement

Removal Procedure

1. Remove the rear corner upper garnish molding.




2. Disconnect the electrical connector from the rear quarter window actuator (1).
3. Remove the rear quarter window actuator retaining bolts (2).
4. Remove the screw that attaches the actuator arm to the window.
5. Remove the actuator from the vehicle.

Installation Procedure




1. Position the actuator assembly (1) to the vehicle.

Notice: refer to Fastener Notice.

2. Install the screw that attaches the actuator arm to the window.

Tighten the screw to 2 N.m (18 lb in).

3. Install the rear quarter window actuator retaining bolts (2).

Tighten the bolts to 10 N.m (89 lb in).

4. Connect the electrical connector to the rear quarter window actuator.
5. Install the rear corner upper garnish molding.