Rear Seat Replacement

Rear Seat Replacement

Removal Procedure




1. Remove the rear seat floor filler trim panel.
2. Slide the rear seat forward. Remove the rear fasteners.




3. Slide the rear seat backward. Remove the front fasteners.
4. Remove the seat.

Installation Procedure




1. Position the rear seat to the vehicle.
2. Install the front fasteners.

Notice: Refer to Fastener Notice.

3. Slide the seat forward. Install the rear fasteners.

Tighten the bolts to 40 N.m (30 lb ft).




4. Install the rear floor filler trim panel.