Brakes and Traction Control: Specifications

Front Brakes
Brake Rotor Diameter 296.00 mm 11.654 in
Brake Rotor Discard Thickness* 27.4 mm 1.079 in
Maximum Allowable Lateral Runout 0.06 mm 0.002 in
Maximum Allowable Scoring 1.50 mm 0.059 in
Maximum Allowable Thickness Variation 0.025 mm 0.001 in

Rear Brakes
Brake Rotor Diameter 191 mm 7.520 in
Rotor Discard Thickness * 18.4 mm 0.724 in
Maximum Allowable Lateral Runout 0.06 mm 0.002 in
Maximum Allowable Scoring 1.50 mm 0.059 in
Maximum Allowable Thickness Variation 0.025 mm 0.001 in

* All brake rotors have a discard dimension cast into them. Replace any rotor that does not meet this specification. After refinishing the rotor, replace any rotor that does not meet the minimum thickness specifications.