Drain Plug Installation

Drain Plug Installation




1. Install a new gasket (820) on the drain plug (819).

Notice: Refer to Fastener Notice.

2. Install the drain plug (819) into the case assembly (17).

Tighten the drain plug to 39 N.m (29 lb ft).




3. Install the vent hose assembly.




4. Install a new o-ring (824) on the transmission fluid level indicator and lubricate with transmission fluid.
5. Install the transmission fluid level indicator.
6. Install the transmission fluid level indicator bolt.

Tighten the indicator bolt to 10 N.m (89 lb in).