Third Gear Band Apply Tube Installation

Third Gear Band Apply Tube Installation




1. Install the 2 third gear band apply tube O-ring seals (53).
2. Install the third gear band apply tube (52).
3. If needed, lightly seat the third gear band apply tube into the transmission case assembly with a soft mallet.




4. Install the third gear band apply tube retainer (51).

Notice: Refer to Fastener Notice in Service Precautions.

5. Install the 2 - M6 x 1.0 x 14 mm third gear band apply tube retainer bolts (50).

Tighten the third gear band apply tube retainer bolts to 5 N.m (44 lb in).