Electronic Brake Control Module Programming and Setup

Electronic Brake Control Module Programming and Setup

EBCM Replacement

If the electronic brake control module (EBCM) is replaced, the following procedures must be performed:

EBCM Reprogramming-Refer to Service Programming System (SPS). Programming and Relearning

EBCM Reprogramming

If the EBCM needs to be reprogrammed, refer to Service Programming System (SPS). Programming and Relearning

Setup for Component Replacement

The replacement of ABS components such as the steering wheel position sensor may require a setup procedure for complete repair. Refer to Steering Angle Sensor Centering