Rear Toe Adjustment

Rear Toe Adjustment





1. Loosen the suspension adjustment link-to-frame fastener enough to allow for movement.

Important: The frame of the vehicle is slotted, a cam nut is available for service if required.


2. Rotate the suspension adjustment link cam nut in the direction necessary to correct the toe angle.
3. Snug the suspension adjustment link-to-frame fastener, do not tighten at this time.
4. Reinspect the rear toe specifications and adjust as necessary.

Notice: Refer to Fastener Notice .

5. Hold the nut and tighten the link-to-frame fastener bolt.

Tighten the bolt to 110 N.m (81 lb ft).

6. Repeat the procedure for the other rear wheel.