Air Flow Meter/Sensor: Service and Repair

Mass Airflow Sensor Replacement

Removal Procedure




1. Remove the air cleaner intake duct.
2. Disconnect the mass air flow (MAF) sensor electrical connector.




3. Remove the screws that retain the MAF to the air cleaner assembly.
4. Remove the MAF from the air cleaner assembly.
5. Remove the MAF to air cleaner assembly seal.

Installation Procedure




1. Install the seal to the MAF.
2. Install the MAF to the air cleaner assembly.

Notice: Refer to Fastener Notice.

3. Install the screws that retain the MAF to the air cleaner assembly.

Tighten the screws to 4 N.m (35 lb in).

4. Install the air cleaner intake duct