Instrument Panel Outer Air Outlet Upper Duct Replacement - Right Side

Instrument Panel Outer Air Outlet Upper Duct Replacement - Right Side

Removal Procedure




1. Remove the RH I/P trim panel.
2. Remove the RH air outlet duct screws from the instrument panel retainer.




3. Remove the RH air outlet duct from the instrument panel retainer.

Installation Procedure




1. Inspect the seals, and replace if damaged, using Kent Industries adhesive backed foam tape P/N 46485 or equivalent.
2. Install the RH air outlet duct to the instrument panel retainer.






Notice: Refer to Fastener Notice.

3. Install the RH air outlet duct screws to the instrument panel retainer.

Tighten the screws to 1 N.m (9 lb in).

4. Install the RH I/P trim panel.