P0897
DTC P0897
Diagnostic Instructions
* Perform the Diagnostic System Check - Vehicle (Initial Inspection and Diagnostic Overview) prior to using this diagnostic procedure.
* Review Strategy Based Diagnosis (Initial Inspection and Diagnostic Overview) for an overview of the diagnostic approach.
* Diagnostic Procedure Instructions (Initial Inspection and Diagnostic Overview)provides an overview of each diagnostic category.
DTC Descriptor
DTC P0897
- Transmission Fluid Life
Circuit/System Description
Transmission fluid life is determined by monitoring transmission fluid temperature over a period of time. The transmission control module (TCM) calculates transmission fluid life based on a set of temperature ranges stored in TCM memory.
Conditions for Running the DTC
No TFT DTC P0712
Conditions for Setting the DTC
The calculated transmission oil life remaining is less than 10 percent.
Action Taken When the DTC Sets
DTC P0897 is a Type C DTC
Conditions for Clearing the DTC
DTC P0897 is a Type C DTC
Diagnostic Aids
* Improper transmission cooling system may cause transmission fluid to age rapidly.
* A malfunctioning TFT sensor may cause transmission fluid to age rapidly.
Reference Information
Schematic Reference
Automatic Transmission Controls Schematics (Electrical Diagrams)
Connector End View Reference
* Electrical Center Identification Views (Application and ID)
* Component Connector End Views (Connector Views)
* Splice Pack Connector End Views (Connector Views)
* Inline Harness Connector End Views (Connector Views)
Electrical Information Reference
* Circuit Testing (Component Tests and General Diagnostics)
* Connector Repairs (Component Tests and General Diagnostics)
* Testing for Intermittent Conditions and Poor Connections (Component Tests and General Diagnostics)
* Wiring Repairs (Component Tests and General Diagnostics)
DTC Type Reference
* Powertrain Diagnostic Trouble Code (DTC) Type Definitions (Diagnostic Trouble Code Descriptions)
* Diagnostic Trouble Code (DTC) List - Vehicle (Diagnostic Trouble Code Descriptions)
Scan Tool Reference
Control Module References (Programming and Relearning)for scan information.
Circuit/System Verification
Observe the DTC information with the scan tool. Verify that the DTC is not set.
If DTC P0897 is set
* Perform the Transmission Fluid Replacement (Removal and Replacement) procedure
* Using a scan tool, reset the transmission oil life
Repair Instructions
Perform the Diagnostic Repair Verification (Verification Tests) after completing the diagnostic procedure.