Liftgate Wiper Motor Replacement

Liftgate Wiper Motor Replacement

Removal Procedure

1. Remove the rear wiper arm. Refer to Rear Window Wiper Arm Replacement (Rear Window Wiper Arm Replacement).
2. Remove the liftgate trim panel. Refer to Liftgate Trim Panel Replacement (Service and Repair).




3. Remove the rear wiper motor bolts.
4. Remove the motor by sliding the pivot shaft out of the rear window grommet.
5. Disconnect the electrical connector.

Installation Procedure




1. Connect the electrical connector.
2. Install the rear wiper motor through the rear window grommet.

Caution: Refer to Fastener Caution (Fastener Caution).

3. Install the wiper motor bolts and tighten to 7 Nm (62 lb in).
4. Install the liftgate trim panel. Refer to Liftgate Trim Panel Replacement (Service and Repair).
5. Install the wiper motor module. Refer to Rear Window Wiper Arm Replacement (Rear Window Wiper Arm Replacement).