Engine Mount Bracket Replacement - Right

Engine Mount Bracket Replacement - Right Side

Removal Procedure




1. Remove the air cleaner assembly. Refer to Air Cleaner Assembly Replacement (Service and Repair).
2. Support the engine. Refer to Engine Support Fixture (Engine Support Fixture).
3. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle (Service and Repair).
4. Remove 3 upper engine mount bracket bolts (1).
5. Loosen right upper front bolt (2).




6. Remove the ABS connector clip from the frame.
7. Remove the upper engine mount bracket nuts (1).
8. Remove the lower bracket bolts (2).




9. Remove the upper bracket bolt (1) from the bracket.




10. Remove the mount (3) and the lower bracket (4) from the vehicle.
11. Remove the upper bracket.

Installation Procedure





Caution: Refer to Fastener Caution (Fastener Caution).

1. Install the engine mount (3) and the lower bracket (4) to the vehicle. Tighten the lower bracket bolts to 50 Nm (37 lb ft).
2. Install the ABS connector clip to the frame.
3. Install the upper engine mount bracket nuts (1) and tighten to 50 Nm (37 lb ft).




4. Install the engine mount upper bracket and bolt (1) to the engine. Do not tighten the bolt.




5. Tighten the right upper engine mount bracket bolt (2) to 50 Nm (37 lb ft).
6. Install the upper engine mount bracket bolts (1) and tighten to 110 Nm (81 lb ft).
7. Lower the vehicle.
8. Remove the engine support. Refer to Engine Support Fixture (Engine Support Fixture).
9. Install the air cleaner assembly. Refer to Air Cleaner Assembly Replacement (Service and Repair).