70. Engine Front Cover Installation

Engine Front Cover Installation




1. Install the engine front cover gasket.
2. Apply sealer GM P/N 12346004 (Canadian P/N 10953480) or equivalent to both sides of the lower tabs of the engine front cover gasket. Apply the sealer no less than 5.0 mm (0.20 in) wide.




3. Install the engine front cover (1) to the engine block aligning the cover with the locating pins.

Caution: Refer to Fastener Caution (Fastener Caution).

4. Install the engine front cover bolts (3, 4). Tighten the bolts to 55 Nm (41 lb ft).
5. Install the engine front cover bolts (2). Tighten the bolts to 27 Nm (20 lb ft).




6. Install the right engine mount bracket (1).
7. Install the right engine mount bracket bolts (2-4). Tighten the bolts to 55 Nm (41 lb ft).
8. Install the engine mount bracket bolts (3). Tighten the bolts to 25 Nm (18 lb ft).




9. Install the heater outlet pipe adapter (319).
10. Install the heater outlet pipe adapter bolt (308). Tighten the heater outlet pipe adapter bolt to 12 Nm (106 lb in).