Windshield Defroster Duct Replacement

Windshield Defroster Duct Replacement

Removal Procedure




1. Remove the instrument panel upper trim panel. Refer to Instrument Panel Upper Trim Panel Replacement (Service and Repair).
2. Remove the windshield defrost duct from the HVAC module.

Installation Procedure




1. Inspect the windshield defrost duct seals. If damaged, replace using Kent Industries adhesive back foam tape P/N 46485 or equivalent.
2. Install the windshield defrost duct to the HVAC module.
3. Install the instrument panel upper trim panel. Refer to Instrument Panel Upper Trim Panel Replacement (Service and Repair).