Unloader Adjustment

Fig. 23 Unloader adjustment. 1982 E2SE Carburetor:

1. Rotate degree scale until zero is opposite pointer, then with choke valve completely closed, place magnet squarely on top of choke valve and rotate bubble until it is centered, FIG 23.
2. Rotate scale so that specified degree for adjustment is opposite pointer.
3. With choke setting properly adjusted, hold primary throttle valve wide open.
4. On warm engines close choke valve by pushing on intermediate choke lever and hold in position with a rubber band.
5. To adjust, bend tang on throttle lever until bubble is centered.