Engine - Availability
Number 84-6 (Diesel)-14 Date 7/84Subject: GM GOODWRENCH 4.3 LITER V-6 DIESEL ENGINE- 1982-84 6000 MODELS
A GM Goodwrench 4.3L V-6 diesel engine is now available through WDDGM for current and past model vehicles equipped with a 4.3L V-6 diesel engine. All GM Goodwrench 4.3L V-6 diesel engines are manufactured with new components. They all contain roller lifter valve trains and incorporate all refinements of current model production.
The GM Goodwrench engine for the LT7 option on 6000 models contains aluminum cylinder heads.
APPLICATION
1982-83-84 Models Package No. Engine Code
LT7 "A" Models (Front Wheel Drive) 22525606 TGW
WHAT'S INCLUDED
Cylinder block assembly, connecting rod and piston assemblies, crankshaft, crankshaft balancer hub, camshaft, cylinder head assemblies including valve trains, camshaft and crankshaft sprockets with chain, timing gears and timing cover, oil pump and screen, oil pan, oil filter (LT7 only), oil level indicator guide and instruction sheet.
The engine will contain oil. The label on the intake manifold cover will indicate the type of oil, winter or summer, that is installed in the engine. It may be necessary to change the oil if it is incorrect for the season that exists when the engine is being installed.
WHAT'S NOT INCLUDED
Most often you can transfer these components not included in the GM Goodwrench engine from the engine that is being replaced to the GM Goodwrench engine. These parts are: intake manifold and related plumbing, exhaust manifold, alternator, power steering, vacuum pump, injection pump, injection nozzles and pipes, fuel pumps, filter and pipes, water pump, block heater, flywheel, pulleys, brackets and belts.
WHAT MUST BE ORDERED SEPARATELY
Intake Manifold Gasket Kit Water Pump Body Gasket
WARRANTY INFORMATION
Any warranty claims submitted to Pontiac for the installation of a GM Goodwrench 4.3L V-6 diesel engine will require zone authorization, and are to be submitted using the following labor operation numbers. List the applicable engine part number in the "Failed Part Number" column.
LABOR TIME ALLOWANCE
LT7 "A" Models J1840 7.6 Hrs.
Add: With Cruise Control .1 Hr.
With Air Conditioning .4 Hr.
Replace Governor Weight .7 Hr.
Retaining Ring (if Required)
Includes: R&R hood, belts, fan and flywheel cover, D&C exhaust pipes, fuel and vacuum lines, linkage, starter and hoses. Drain and refill engine oil (if required) and coolant. Check injection pump governor weight retaining ring. Make all necessary adjustments including dynamic timing. Also includes time to transfer all required parts.