Models Equipped With Remote Coil Distributor

1. Disconnect battery ground cable, then disconnect wiring harness from distributor.
2. Remove distributor cap with ignition cables connected and position aside.
3. Remove ignition coil as described under "Ignition Coil, Replace."
4. Remove air cleaner and disconnect fuel pump hoses at fuel pump.
5. Remove fuel pump and pushrod.
6. Mark relationship of rotor to distributor housing and distributor housing to engine, then remove distributor hold-down clamp and remove distributor from engine.
7. Install distributor checking to ensure that marks made during removal align.
8. Install hold-down clamp and distributor cap.
9. Connect distributor wiring harness electrical connector.
10. Install fuel pump, air cleaner and ignition coil.
11. Adjust ignition timing.