Carburetor - Adjustment Specification Revisions

Number 83-I-33 Secton 6 Date 01/83
This TSB has been updated by TSB # 83I62, dated 4/83.

Subject: 1983 CARBURETOR ADJUSTMENT SPECIFICATION REVISIONS
Included on this bulletin are 1983 Carburetor Specification revisions and additions. These should be penciled into the appropriate section of your current General Carline Information Manual until complete new pages are printed with the revisions.

ADJUSTMENT-SPECIFICATIONS - E2ME

CARBURETOR CHOKE PRI.
NUMBER ROD CAM VAC. BREAK

17083193 17~ 23~

ADJUSTMENT SPECIFICATIONS - E2SE

CARBURETOR FLOAT LEVEL
NUMBER MM INCHES

17083369 3.3 1/8
17083370 3.3 1/8
17083371 3.3 1/8
17083450 3.3 1/8
17083451 3.3 1/8
17083452 3.3 1/8
17083453 3.3 1/8
17083454 3.3 1/8
17083455 3.3 1/8
17083456 3.3 1/8
17083630 6.5 1/4
17083631 6.5 1/4
17083632 6.5 1/4
17083633 6.5 1/4
17083634 6.5 1/4
17083635 6.5 1/4
17083636 6.5 1/4
17083650 3.3 1/8

FAST
AIR IDLE
VALVE CHOKE CAM VAC AIR VAC
CARBURETOR SPRING COIL (CHOKE BREAK VALVE BREAK

NUMBER (TURNS) LEVER ROD) PRI. ROD SEC. UNLOADER

17083650 .5 .085 28~ 27~ 1~ 35~ 45~

ADJUSTMENT SPECIFICATIONS - E4ME

CARBURETOR PRI.
NUMBER VAC. BREAK

17083242 15~
LEAN RICH IDLE IDLE AIR CHOKE
CARBURETOR ENGINE FLOAT MIXTURE MIXTURE MIXTURE AIR VALVE COIL
NUMBER CODE SETTINGS SCREW SCREW SCREW BLEED SPRING LEVER

17083204 H 11/32 NOTE 1 4/32 3-3/8 NOTE 3 7/8 NOTE 4


CHOKE PRI. SEC. AIR
CARBURETOR ROD VAC. VAC. VALVE
NUMBER CAM BREAK BREAK ROD UNLOADER

17083204 20~ 27~ --- .025 38~