Instrument - Driver Information Center Displays Bad Bulb
Number 85-8-7 Date5/85
Subject: DRIVER INFORMATION CENTER (D.I.C.) DISPLAY
1984/1985 6000 STE
CONDITION
The Driver Information Center (D.I.C.) displays an inoperative bulb condition when the bulb is actually good.
CAUSE
There may be several causes for the condition:
1) The original equipment (OEM) bulb was replaced with a bulb having a different current draw.
2) The D.I.C. memory has not been cleared.
CORRECTION
1) Turn the headlight switch "on" then "off" to clear the D.I.C. memory and display.
2) If the condition persists, check the bulb for a part number. Use of the following replacement bulb part numbers are suggested for use on the STE:
I. 1984 MODEL YEAR:
HEAD LIGHTS REAR LIGHTS
LOW BEAM HIGH BEAM TAIL LAMPS & STOP LAMPS
(1 Per Side) (1 Per Side) (2 Per Side)
16502327 5930567 9438848
(H4662) (H4651) (2057)
FRONT REAR
TURN SIGNAL TURN SIGNAL
(1 Per Side) (2 Per Side)
9438850 9438850
(2057NA) (2057NA)
The following lamps are not monitored by the D.I.C.:
^ Front Park Lights
^ Front & Rear Side Marker Lights
^ Fog Lights
II. 1985 MODEL YEAR
1985 6000 STE bulb/lamp replacements are identical as above except for rear tail and rear stop quantities and rear turn part numbers.
REAR LIGHTS
TAIL LAMPS & STOP LAMPS REAR TURN
(3 Per Side) (1 Each Per Side)
9438848 9438848
(2057) (2057)
NOTICE: The part numbers in parentheses are the bulb trade numbers.