Primary Vacuum Break Adjustment

Fig. 14 Blocking air bleed holes:

Prior to adjusting vacuum break, refer to Fig. 14 for air bleed hole blocking procedures.

Fig. 11 Carburetor angle gauge installation:

Install carburetor angle gauge tool No. J-26701 or BT-7704 as shown in Fig. 11.

Fig. 15 Primary vacuum break adjustment w/single break unit:

Fig. 16 Primary vacuum break adjustment w/dual break units:

With gauge installed, adjust primary vacuum break as outlined in Figs. 15 and 16. Adjust as directed to dimension listed in Adjustment Specification.