Water Pump: Service and Repair

Remove or Disconnect






1. Negative battery cable.
2. Engine coolant.
3. Accessory drive belts.
4. Lower radiator hose at pump.
5. Water pump attaching bolts.
6. Water pump.

Clean
^ Water pump mating surfaces

Install or Connect

1. If installing a new water pump, transfer pulley from old unit.
2. A 3mm (1/8") bead of sealant, 1052289 or equivalent, on the water pump sealing surface.
3. Water pump, while sealer is still wet.
4. Water pump attaching bolts and torque bolts to specifications.
5. Lower radiator hose at pump.
6. Accessory drive belts to proper tension.
7. Engine coolant.
8. Negative battery cable.

Inspect
^ For proper completion of repair
^ For coolant leaks