Operation CHARM: Car repair manuals for everyone.

P/S - Leaking Hose Line Connection Fitting

Number 85-3-14 Date 4/85
Subject: POWER STEERING HOSE LINE CONNECTION FITTING LEAKS

ALL MODELS
O-ring type seal fittings have been used on rack and pinion and integral gear power steering hose line connections since 1980.

Fitting torque specification is 27 N-m (20 ft.lbs). If a leak is experienced at the fitting area when properly tightened, this condition may be caused by a damaged fitting O-ring. Inspect the O-ring for damage, pipe end for cracks, fitting threads for damage and replace as required.

DO NOT EXCEED fitting torque specification. Additional torque will not increase O-ring sealing ability and may result in cracking the connection boss on aluminum gear housings. If a leak is experienced at the connection area with a new undamaged O-ring under correct torque, inspect housing boss for possible porosity. A porosity condition will require housing or short gear replacement.