Installation Precautions:

^ Disconnect the negative battery cable before performing any electrical hook-ups.

^ All the connections of the afterblow module harness to the vehicle wiring should be performed using the technique described in Section 8A of the Service Manual. Splices/connections should be made using splice clips, or solder. Do not use instant connectors such as 3M's "Scotchblock" brand, ^ All unused module wires must be taped and secured to prevent future electrical problems.

^ The afterblow module is not compatible with some non-factory installed theft alarm systems. The module current draw in the key off position could trigger alarms that sense battery voltage changes or current drain.