Drivetrain - Drive Shaft Seal - Installation Precautions
Number 85-4-3 Date 5/85Subject: DRIVE SHAFT INBOARD THERMOPLASTIC SEAL INSTALLATION
1985 SUNBIRD, GRAND AM, 6000
Joint and Seal Assembly:
The inboard thermoplastic drive shaft seal must be assembled to a specific dimension to prevent ballooning of the seal. Follow these steps when assembling the seal:
1. Crimp clamp at drive axle shaft (small end)..
2. Compress joint and seal to 130 mm (5 1/8"). See illustration.
3. Crimp clamp at joint end (large end).